Subcategories

• Pre-amplifiers

  The role of the preamplifier is to adapt the source signal before it is amplified by the power stages. As the first stage of amplification, it is the key to a good signal-to-noise ratio. Indeed, the more a signal is weak in intensity, the more it is sensitive to interference. It is this point in particular that will make the difference between a good and a bad preamp.
  That said, the goal of separating the main power stages and preamplification becomes explicit: to limit the interference between the high level and the low level.
  In addition to that, some preamps will have a built-in DAC, a balance management, a frequency filter or a CD player.

• Power amplifiers

  Power amplifiers do not have a preamplifier stage. Here we will not get lost in functionality because the purpose is to amplify the signal without modifying it. Separating power and preamplification will limit interference between the high level and the low level which is very sensitive to noise.

• Encased amplifiers

  The products in this section are amplifiers in the most general sense of the term. Key in hand, it can be directly connected between your source and your speakers. Some are more minimalist and therefore focus exclusively on their power and their stages of amplification and pre-amplification, while others will provide you with features that can be diverse. Do not hesitate to come and listen in store !

• Subwoofer amplifiers

  The basic principle is simple: a tweeter with a 25mm self and a titanium diaphragm does not need the same energy as a 38cm speaker specialized in bass and subwoofer reproduction. This observation can lead us to amplify separately the famous 38 in order to obtain the desired deflections and the expected final result: impacts and whole notes not truncated below 40Hz.
  The second point is that, physically, if we want serious that down to 20 Hz with a dynamic worthy of the name, we need a box that becomes monstrous by its dimensions. The amps we selected here incorporate a compensation to correct the signal sent to the speakers. This allows us to reduce this volume without compromising the range of the bass and its naturalness.

• Headphone amplifiers

  Many other amplifiers in our selection have a headphone output. You will find in this section only amplifiers really dedicated for this purpose.

  We invite you to pay close attention to the compatibility of the impedance of your helmet with the chosen material.