690,0 € tax incl.
AX 1 Integrated Amp / Preamp 2 x 45 W - Class A (High Bias) - black or white finish, from Advance Paris. The French manufacturer Advance Acoustic offers us under the Advance Paris brand an integrated amplifier of very high performance, nothing has been left to chance, whether it is in terms of the choice of components, connectivity, aesthetics or even level of manufacturing quality.
Warning: Last items in stock!
|Nominal impedance Z||input : 47 KΩ|
|Properties||Wolfson WM8740 DAC / AKM AK4113 Audio Interface (24 Bit / 216 kHz) / Toroidal Transformer / Transparent Methacrylate Faceplate|
|Frequency response||10 Hz - 50 kHz (-3dB)|
|Harmonic distortion||inf à 0,03%|
|Consumption||less than 350 W|
|Signal to noise ratio (SNR)||greater than 98 dB|
|Supplied accessories||Infrared remote control|
|Input||5 RCA line inputs / 1 RCA phono input + GND socket / 3 optical digital inputs / 1 coaxial digital input / 2 XLR auxiliary inputs (L and R)|
|Output||2 trigger outputs / 1 bus for extension (Bluetooth receiver X-FTB01) / 1 pre-out XLR output (G and D) / 2 pre-out RCA outputs / 1 LFE output for subwoofer / 2 outputs headphones jack 3.5 mm|
|Output power||in 8 Ohms: 2x45 W / in 4 Ohms: 2x65 W|
|Separation of channels||greater than 70 dB|
|Dimensions||(W x H x D): 230 x 133 x 325 / 305mm|
|Tone control||+/- 10 dB|
|Input level (CD / AUX ...)||less than 300 mV|
|Niveau d'entrée||less than 1,1V|
|Entry level Phono MM||2,5 mV|
The AX1 preamp power stages consist of a push-pull of bipolar transistors per channel and are powered by a 350 VA toroidal transformer. The voltages are then rectified and filtered by 2 x 6800 μF at 50 volts. The AX1 is equipped with a second power supply that supplies low power elements such as the Wolfson WM8740 DAC, preceded by an Asahi Kasei AK4113 receive interface, the AX1 can convert the PCM up to 192 kHz to 24 bits. This integrated amp perfectly manages to create a balance between a presence of the low end of the spectrum and a tension sufficient to never pour into heaviness. At the level of connectivity, we find at the inputs: 6 asymmetric on Cinch including 1 phono, 1 symmetrical XLR, S / PDIF digital inputs: 3 optical Toslink and 1 coaxial on Cinch, Bluetooth input: via specific adapter on HE10 connector (The X-FTB01 receiver fits very well). And at the outputs: 1 unbalanced on Cinch and 1 balanced on XLR (Pre Out), 1 unbalanced line (Rec Out). Comes with an infrared remote control.
No customer reviews for the moment.